Today we are going to look at how to fix door trim chewed by dog. There are times when you may leave the young dog unattended. The dog becomes curious and you find it has chewed wooden door trim.
That is the time you realize you need to teach the small dog how to behave and start teaching or showing it that chewing furniture or doors is not good. To prevent any future chewing the trim, you need to start training the pet at an early stage.
But what happens in case the damage has already occurred and the door looks bad when from the front end?
Don’t worry!
It can easily be fixed.
You can easily do it by yourself.
Today we are going to show you how to repair a door frame chewed by a dog.
Let’s find out how to repair dog chewed wood door frame
There are many tricks for trim repair. You can use different ways to fix a wooden door if it has a bite, scratch, or is chewed by your pet.
We are going to show you the simplest way on how to repair the door trim.
You may also like: Dog Beds That Are Chew Proof
How to Fix Door Trim Chewed by Dog
Follow the below steps on how to repair wood trim chewed by a dog.
Materials needed:
- A cloth
- Pencil
- Glue
- Measuring tape
- Hammer and a little nail set
- Cardboard box
- Duct tape
- Pull scraper, Sandpaper
- Putty Knife
- Scissor or Cutter
- Drywall joint compound
- Paint and paintbrush
Fix Door Trim Chewed by Dog using Wood Filler
Your door might have damages such as cracks or gouge from your dog’s scratching or chewing. Below are the steps to follow on how to fix the door.
Step 1: Sand the Door Trim
The first thing you will be required to do is to use the pull scraper to scrape the surface of the wood to get rid of surface splinters. Then using the sandpaper, proceed and sand the damaged area down by going with the grain of the wooden door trim. Try as much as possible to sand smooth areas that cannot be filled in. do not worry when you remove the finish that was there, as you can touch that up afterward.
Step 2: Wipe Away Dust
Use a cloth to wipe away the dust created while sanding the trim.
Step 3: Prepare the Drywall Joint Compound
Get good wood filler; take a small piece of cardboard, place some putties on it. Get some hardener to put with it. Mix it systematically until ready.
Step 4: Fill Small Holes and Cracks
When the mixture is ready, fill any cracks or holes and remove any excess. Don’t worry if you put excess as long as you ensure the holes are filled. The excess will be removed later
Step 5: Allow Joint Compound to Dry and Sand it
Let the joint compound completely dry for 25 to 30 minutes before continuing. After it has hardened, take the sandpaper and sand it. Sand it until it feels smooth or see it’s exactly the way you would want it to be.
Step 6: Prepare to Paint
Now it’s time to prepare to paint. Spread old newspapers or plastic sheeting at the base of the door where you will be painting. This will prevent the paint from falling on the floor.
Step 7: Apply Primer
Use a brush to apply a heavy coat of paint primer to the entire surface to be painted. This will help in hiding any imperfections where the joint compound was applied or make the paint bond properly with the surface.
Step 8: Paint
Paint or polish with the door color.
Conclusion
With these simple steps on how to fix door trim chewed by a dog now, you will be able to fix your door anytime your friend damages it.